Làm thế nào để sử dụng một tàu chở xi măng số lượng lớn, vết lõm xi măng, nhà cung cấp xi măng và trailer xi măng
1, Đang tải 1.1, Before open the manhole, trước hết phải mở van xả của tàu chở dầu, and check the inner tanker pressure is equal to atmospheric pressure, tức là. the pressure gauge value is zero. 1.2, After open the manhole, kiểm tra xem có sự kết tụ của vật liệu bột trong tàu chở dầu không, especially the tanker ever loaded powder material and was off duty for long time. Trong trường hợp có sự kết tụ, phải thoát khỏi nó. 1.3, After material loaded, kiểm tra vòng đệm cửa cống có bằng vật liệu điện hay không, nếu có, làm sạch nó để đảm bảo khả năng bịt kín. 2, Đang dỡ hàng 2.1, Connect the discharge hose of tanker to the needed place, đảm bảo độ kín. 2.2, Close the discharge butterfly valve, outside air supply valve and the assistance air valve. 2.3, Start the engine of truck, khi áp suất phanh đạt 392KPa, depress the clutch pedal, tham gia PTO, sau đó nhả bàn đạp từ từ. After the compressor run smoothly, then accelerate to the rated speed and supply the pressed air to tanker. 2.4, When the pressure gauge value reaches to 196KPa, mở van xả. During the unloading period, nếu áp suất tăng lên và có xu hướng vượt quá 196KPa, that means the discharge pipe was…