Kako uporabljati tanker za prevoz cementa v razsutem stanju, cementni rezervoar, nosilec cementa in prikolica za cement
1, Nalaganje 1.1, Before open the manhole, najprej je treba odpreti razbremenilni ventil cisterne, and check the inner tanker pressure is equal to atmospheric pressure, tj. the pressure gauge value is zero. 1.2, After open the manhole, preverite, ali je bil v cisterni aglomerat praškastega materiala, especially the tanker ever loaded powder material and was off duty for long time. V primeru, da je bil aglomerat, se ga je treba znebiti. 1.3, After material loaded, preverite, ali je tesnilni obroč jaška z močnim materialom ali ne, če da, očistite, da zagotovite tesnjenje. 2, Razkladanje 2.1, Connect the discharge hose of tanker to the needed place, zagotoviti tesnjenje. 2.2, Close the discharge butterfly valve, outside air supply valve and the assistance air valve. 2.3, Start the engine of truck, ko je zavorni tlak dosegel 392 KPa, depress the clutch pedal, vklopite priključno gred, nato počasi spustite pedal. After the compressor run smoothly, then accelerate to the rated speed and supply the pressed air to tanker. 2.4, When the pressure gauge value reaches to 196KPa, odprite izpustni ventil. During the unloading period, če se tlak dvigne in preseže 196 KPa, that means the discharge pipe was…