Vibračná sušička s fluidným lôžkom

popis

Vibračná sušička s fluidným lôžkom

Spoliehajúc sa na výkonnú technickú silu, vieme prispôsobiť výpočty a navrhnúť zariadenia podľa podrobného stavu materiálu a požiadaviek zákazníkov. Uistite sa, že zariadenia sú pre používateľov najvhodnejšie.

Working Principle:

Two equipped vibrating motors on the dryer produce exciting force, which makes materials leap forward along the horizontal orifice plate. Hot air gets through orifice plate upward from the lower part, passes through the material layer to achieve the purpose of dehydration.

vlastnosť:

1. Energy efficient. As material leaps around though orifice plate and fully contacts with the hot air, thermal efficiency is very high.
2. Widely used. Changing of vibrating motor exciting force and installation direction angle can change material’s running speed and running status, so it’s suitable for drying or cooling different kinds of materials.
3. Good drying effect. Vibration makes material in leaping status, hot air from lower part may have a damping effect, so material wear less, it’s broken rate is low, and no overheating or leakage phenomenon.
4. Low noise, good vibration isolating. The equipment can be put on the floor slab directly, installed and removed conveniently, and sealed well, creating a nice working condition.
5. If partition is set up in the middle of container, with hot air in the front section, and cold air in the back section, drying and cooling can be achieved simultaneously.
6. Low investment, low operating cost, simple in structure, sturdy and durable, easy maintenance, light weight.
7. Automatic material feeding device can be installed to realize feeding evenly and continuously, constitute an automatic flow production line.Application:
   Foodstuff, chemický priemysel, pharmaceutical industry, krmivo, plastický, salt manufacture, obilia, semienko, cigarette, cukor, metallurgy etc.

 

Main technical parameter:

Length of dryer (mm)	Width of vibration container(mm)	Width of dryer (mm)	Height of dryer(mm)	závažia(kilogram)
3000	300	1350	1700	1240
	600	1650	1700	1400
	900	1950	1850	1630
	1200	2250	2050	2030
	1500	2650	2250	2420
4500	300	1350	1700	1570
	600	1650	1700	1860
	900	2000	1850	2430
	1200	2300	2050	3030
	1500	2600	2250	3680
6000	500	1350	1700	1960
	600	1700	1700	2440
	900	2000	1850	3160
	1200	2400	2050	3580
	1500	2700	2250	4230
7500	600	1700	1700	3900
	900	2100	1850	4140
	1200	2500	2040	5190
	1500	2950	2450	5940

Structure diagram:

1.Dryer 2. Feeding inlet 3.Air outlet 4.Vibration motor

5.Cleaning peep door 6.Air inlet 7.Discharging outlet 8.Rack

1.blower 2.heater 3.charging machine 4.flexible pipe 5.exhaust pipe

6.thermometer(2 pieces) 7.dust precipitator 8.exhaust pipe 9.exhaust fan

10.discharging outlet 11.drying device 12.air supplying pipe