기술
진동 유동층 건조기
강력한 기술력을 바탕으로, 우리는 고객의 상세한 재료 조건 및 요구 사항에 따라 장비를 사용자 정의 계산 및 설계 할 수 있습니다.. 사용자에게 가장 적합한 장비인지 확인하십시오..
Working Principle:
Two equipped vibrating motors on the dryer produce exciting force, which makes materials leap forward along the horizontal orifice plate. Hot air gets through orifice plate upward from the lower part, passes through the material layer to achieve the purpose of dehydration.
특징:
- Energy efficient. As material leaps around though orifice plate and fully contacts with the hot air, thermal efficiency is very high.
- Widely used. Changing of vibrating motor exciting force and installation direction angle can change material’s running speed and running status, so it’s suitable for drying or cooling different kinds of materials.
- Good drying effect. Vibration makes material in leaping status, hot air from lower part may have a damping effect, so material wear less, it’s broken rate is low, and no overheating or leakage phenomenon.
- Low noise, good vibration isolating. The equipment can be put on the floor slab directly, installed and removed conveniently, and sealed well, creating a nice working condition.
- If partition is set up in the middle of container, with hot air in the front section, and cold air in the back section, drying and cooling can be achieved simultaneously.
- Low investment, low operating cost, simple in structure, sturdy and durable, easy maintenance, light weight.
- Automatic material feeding device can be installed to realize feeding evenly and continuously, constitute an automatic flow production line.Application:
Foodstuff, 화학 산업, pharmaceutical industry, 사료, 플라스틱, salt manufacture, 곡물, 씨앗, cigarette, 설탕, metallurgy etc.
Main technical parameter:
| Length of dryer (mm) | Width of vibration container(mm) | Width of dryer (mm) | Height of dryer(mm) | 무게(킬로그램) |
| 3000 | 300 | 1350 | 1700 | 1240 |
| 600 | 1650 | 1700 | 1400 | |
| 900 | 1950 | 1850 | 1630 | |
| 1200 | 2250 | 2050 | 2030 | |
| 1500 | 2650 | 2250 | 2420 | |
| 4500 | 300 | 1350 | 1700 | 1570 |
| 600 | 1650 | 1700 | 1860 | |
| 900 | 2000 | 1850 | 2430 | |
| 1200 | 2300 | 2050 | 3030 | |
| 1500 | 2600 | 2250 | 3680 | |
| 6000 | 500 | 1350 | 1700 | 1960 |
| 600 | 1700 | 1700 | 2440 | |
| 900 | 2000 | 1850 | 3160 | |
| 1200 | 2400 | 2050 | 3580 | |
| 1500 | 2700 | 2250 | 4230 | |
| 7500 | 600 | 1700 | 1700 | 3900 |
| 900 | 2100 | 1850 | 4140 | |
| 1200 | 2500 | 2040 | 5190 | |
| 1500 | 2950 | 2450 | 5940 |
Structure diagram:
1.Dryer 2. Feeding inlet 3.Air outlet 4.Vibration motor
5.Cleaning peep door 6.Air inlet 7.Discharging outlet 8.Rack
1.blower 2.heater 3.charging machine 4.flexible pipe 5.exhaust pipe
6.thermometer(2 pieces) 7.dust precipitator 8.exhaust pipe 9.exhaust fan
10.discharging outlet 11.drying device 12.air supplying pipe
