Kako koristiti tanker za rasuti cement, cementne udubljenja, nosač cementa i prikolica za cement
1, Učitavam 1.1, Before open the manhole, prvo mora otvoriti sigurnosni ventil cisterne, and check the inner tanker pressure is equal to atmospheric pressure, tj. the pressure gauge value is zero. 1.2, After open the manhole, provjerite je li u tankeru bilo nakupina praškastog materijala, especially the tanker ever loaded powder material and was off duty for long time. U slučaju da postoji aglomerat, mora se riješiti toga. 1.3, After material loaded, provjerite ima li brtveni prsten šahta materijal za napajanje ili ne, ako da, očistite ga kako biste osigurali mogućnost brtvljenja. 2, Istovar 2.1, Connect the discharge hose of tanker to the needed place, osigurati zapečaćenost. 2.2, Close the discharge butterfly valve, outside air supply valve and the assistance air valve. 2.3, Start the engine of truck, kada je kočioni tlak dosegao 392 KPa, depress the clutch pedal, uključi PTO, zatim polako otpustite papučicu. After the compressor run smoothly, then accelerate to the rated speed and supply the pressed air to tanker. 2.4, When the pressure gauge value reaches to 196KPa, otvoriti ispusni ventil. During the unloading period, ako se tlak poveća i ima tendenciju premašiti 196 KPa, that means the discharge pipe was…