+86-24-31515116
info@sycomptech.com
Facebook
Κελάδημα
Google+
LinkedIn
YouTube
logo00
  • ΣΠΙΤΙ
  • ΣΧΕΤΙΚΑ ΜΕ ΕΜΑΣ
  • ΠΡΟΪΟΝΤΑ
    • Τσιμέντο συμπιεστή
    • Ξήρανση Εξοπλισμός
    • Σύνδεση Μετατοπιστής
    • Μαζική σκόνη Πνευματικοί ταινιοδρόμων
    • Ανταλλακτικά Τρέιλερ
    • Heavy Duty Μηχανήματα
    • σφράγιση Μέρη
    • casting Μέρη
  • ΕΞΟΠΛΙΣΜΟΣ
  • ΝΕΑ
  • ΕΠΙΚΟΙΝΩΝΗΣΤΕ ΜΑΖΙ ΜΑΣ
Προϊόν Προστέθηκε στο καλάθι σας

με Transposh - translation plugin for wordpress

Μεταφορέας ξύστρας τύπου αλυσίδας

Σπίτι Ξήρανση Εξοπλισμός Μεταφορέας ξύστρας τύπου αλυσίδας

Κατηγορία: Ξήρανση Εξοπλισμός
Στείλτε e-mail για να μας
μερίδιο : 
  • Περιγραφή

Περιγραφή

Primary structure and working principle

This scraper conveyor consists of head section, tail section, middle section, outlet section and inlet section. (see Figure 1, Figure 2)

1. Head section consists of container, drive shaft, drive sprocket, motor and transmission deceleration system. Chain transmission system and conveying system are driven by motor. Head section acts both power input and material discharging end. According to actual need, discharging opening can also be designed separated from the head. And power input can be located on either side of the head section optionally, depending on the site conditions.

2. Tail section consists of container, driven shaft, driven sprocket and tension device. Tension device is used to adjust the scraper chain tension. Tail section is feeding end. According to actual need, feeding opening can also be designed separated from the tail.

Figure 1.

1.Outlet section 2.Head section 3.Support 4.Straight section 5.Curved section

6.Feeding opening 7.Tail section 8.Leveler 9.Buffer hopper

 

3. The middle section consists of container slide rails, scraper chains and container cover. This section is used for the transportation of material. It can be divided into a curved section and a straight section.

4. Output section and inlet section consists of outlet flange, inlet flange and connector. This section is for material in and out.

5. Chain is the major working part. Tooth surface is the working surface.

6. Transmission realized through reducer in the form of chain transmission connecting with head transmission shaft.

 

Figure 2.

1.Outlet section 2.Head section 3.Support 4.Straight section

5. Leveler 6. Buffer hopper 7.Feeding opening 8.Tail section

Στείλτε το μήνυμά σας σε εμάς:








Παρακαλώ αποδείξτε ότι είστε άνθρωπος επιλέγοντας το Αστέρι.




Σχετικά προϊόντα

  • Πλήρες αυτόματο στεγνωτήριο περιστροφικού πριονιού τριών περασμάτων

    Διαβάστε περισσότερα
  • Marigold Dryer

    Διαβάστε περισσότερα
  • Περιστροφικό τύμπανο τριών βρόχων στεγνωτήριο σπινθήρων

    Διαβάστε περισσότερα
  • Τρίκλινο Loops περιστροφική εισαγωγή τυμπάνου Cow Dung Dring Εξοπλισμός

    Διαβάστε περισσότερα

Προϊόντα

  • Τσιμέντο συμπιεστή
    • Σταθερός Μετά Πλαίσιο συμπιεστή
    • Κρεμαστά Σύμφωνα με σασί συμπιεστή
    • Diesel κινητήρα συμπιεστή
    • Motor συμπιεστής
  • Ξήρανση Εξοπλισμός
  • Σύνδεση Μετατοπιστής
  • Μαζική σκόνη Πνευματικοί ταινιοδρόμων
  • Ανταλλακτικά Τρέιλερ
  • Heavy Duty Μηχανήματα
  • σφράγιση Μέρη
  • casting Μέρη

Νέα

  • Πώς να χρησιμοποιήσετε ένα δεξαμενόπλοιο χύδην τσιμέντου, χύδην τσιμέντου, φορέας τσιμέντου και ρυμουλκούμενο τσιμέντο 2020-04-26
  • Τι πρέπει να προσέξετε για τη χρήση του συμπιεστή όγκου 2020-04-20

Επαφές

No.208 South Yangtze River Street Huanggu Περιφέρεια Σενγιάνγκ Κίνα
+86-24-31515116
+86-24-31515117
info@sycomptech.com

Ακολουθησε μας

Facebook
Κελάδημα
Google+
LinkedIn
YouTube
Copyright © 2018 Shenyang Comptech Μηχανήματα Technology Co., Ltd.