Jak používat cisternu na cement, cementové důlky, cementový nosič a cementový přívěs
1, Načítání 1.1, Before open the manhole, nejprve musí otevřít pojistný ventil cisterny, and check the inner tanker pressure is equal to atmospheric pressure, tj. the pressure gauge value is zero. 1.2, After open the manhole, zkontrolujte, zda se v cisterně nenacházel aglomerát práškového materiálu, especially the tanker ever loaded powder material and was off duty for long time. V případě, že tam byl aglomerát, musí se toho zbavit. 1.3, After material loaded, zkontrolujte, zda je těsnicí kroužek průlezu s napájecím materiálem nebo ne, pokud ano, vyčistěte jej, abyste zajistili těsnost. 2, Vykládání 2.1, Connect the discharge hose of tanker to the needed place, zajistit těsnost. 2.2, Close the discharge butterfly valve, outside air supply valve and the assistance air valve. 2.3, Start the engine of truck, kdy brzdný tlak dosáhl hodnoty 392 kPa, depress the clutch pedal, zapnout PTO, poté pomalu uvolňujte pedál. After the compressor run smoothly, then accelerate to the rated speed and supply the pressed air to tanker. 2.4, When the pressure gauge value reaches to 196KPa, otevřete vypouštěcí ventil. During the unloading period, pokud se tlak zvýší a má tendenci překročit 196 kPa, that means the discharge pipe was…