Как да използвате цистерна за насипни цименти, циментови вдлъбнатини, циментов носител и циментово ремарке
1, Зарежда се 1.1, Before open the manhole, първо трябва да отворите предпазния клапан на танкера, and check the inner tanker pressure is equal to atmospheric pressure, т.е. the pressure gauge value is zero. 1.2, After open the manhole, проверете дали в танкера има агломерат от прахообразен материал, especially the tanker ever loaded powder material and was off duty for long time. В случай, че имаше агломерат, трябва да се отървете от него. 1.3, After material loaded, проверете дали уплътнителният пръстен на шахтата е със захранващ материал или не, ако да, почистете го, за да осигурите възможност за запечатване. 2, Разтоварване 2.1, Connect the discharge hose of tanker to the needed place, осигурете запечатване. 2.2, Close the discharge butterfly valve, outside air supply valve and the assistance air valve. 2.3, Start the engine of truck, когато спирачното налягане достигна 392KPa, depress the clutch pedal, включете ВОМ, then release pedal slowly. After the compressor run smoothly, then accelerate to the rated speed and supply the pressed air to tanker. 2.4, When the pressure gauge value reaches to 196KPa, open the discharge valve. During the unloading period, if the pressure raised and tend to exceed 196KPa, that means the discharge pipe was…